自動控制
機器視覺
機器學習
最佳化方法
觀測器設計
PC-based製造自動化系統整合
自動控制
機器視覺
機器學習
最佳化方法
觀測器設計
PC-based製造自動化系統整合
國立成功大學電機工程 博士
國立東華大學電機工程 碩士
國立高雄大學電機工程 學士
國立虎尾科技大學自動化工程系 專任助理教授
國立勤益科技大學前瞻電資科技產業博士學位學程 專任助理教授
金屬工業研究發展中心精密機電組 副工程師
【A】擔任科技部/政府專案/產業界計畫主持人：
1. 周阜毅，具低敏感性或區間初值之降階狀態觀測器的智能優化設計(Intelligent Optimal Design of Reduced-Order State Observers with Low Sensitivity or Interval Initial Conditions) (二年期科技部計畫，擔任計畫主持人，科技部MOST 109-2222-E-150-002-MY2)，March 2020 to February 2022。
2. 周阜毅，專案計畫：機器人腹腔手術系統技術開發計畫(Microsurgery simulation system - robotic part： A microsurgery simulation system with force-feedback control system is separated into two part - UI environment & Robotic hardware. Our team is responsible for robotic hardware, and I am the project manager & control rule designer in this project.) (三年期之政府專案計畫，擔任計畫主持人，金屬工業研究發展中心)，August 2014 to July 2017。
3. 周阜毅，專案計畫：關鍵影響因子量測技術與設備開發(AOI equipment for production line of vehicle solenoid valve.) (政府專案計畫，擔任計畫主持人，金屬工業研究發展中心)，April 2016 to March 2017。
4. 周阜毅，產業計畫：電磁閥閥體組裝系統(SV Connector Coil Assembly Machine Upgrade.) (產業界計畫，擔任計畫主持人，朋程科技公司)，February 2019 to June 2019。
【B】擔任產業界之專案計畫的執行人：
1. 周阜毅，扣件AOI系統(Fastener AOI System： Development of AOI software for motor production line.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，October 2018 to November 2018。
2. 周阜毅，觸控IC對準軟體研發(Touch IC Alignment Software： Design software for finding the center of touch IC and feedback position to PLC controller.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，July 2018 to September 2018。
3. 周阜毅，機器人路徑產生器研發(Uni-Robot Path Generator： Design uni-robot interface for generating shoe spraying path of Yasukawa, Mitsubishi, Kuka and Denso manipulator.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，March 2018 to May 2018。
4. 周阜毅，全焦點醫學影像系統軟體研發(All-in-Focus Medical Image： Design vision software for reconstructing blurry images from the microscope.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，March 2016 to May 2016。
5. 周阜毅，組件自動包裝系統軟體研發(Turbo Components Auto Packing： Design vision alignment software for robot grabbing.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，February 2016。
6. 周阜毅，雷射切割機軟體研發(Laser Cutting Machine： Design nesting software for laser cutting machine.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，October 2015 to November 2015。
7. 周阜毅，高爾夫球桿自動測量設備(Golf Club Auto-Measurement Equipment： Measuring spec of club by Keyence laser module for QC department – Eaton of Taiwan & Thailand). (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，September 2014 to October 2014。
8. 周阜毅，RAM IC焊接點-高速AOI系統(RAM IC Welding Spot - High-Speed AOI： Designing high-speed AOI system for checking RAM IC welding spot by using area-scan CCD.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，May 2014 to August 2014。
9. 周阜毅，模糊製氧機(Fuzzy Oxygen Concentrator： An auto flow control oxygen generator.) (工業服務專案計畫，擔任計畫執行人，金屬工業研究發展中心)，January 2013 to January 2014。
＜期刊發表＞
1. F. I Chou, W. H. Ho, Y. J. Chen, and J. T. Tsai, 2021, "A triangulation estimation and forecasting framework for agricultural time series", J. of Intelligent and Fuzzy Systems, (accepted for publication).
2. F. I Chou, M. R. Hsu, and W. H. Ho, 2021, "Optimal parallel-distributed-compensation controller design for a class of time-varying Takagi–Sugeno fuzzy model–based time-delay systems by using the orthogonal function approach–assisted genetic algorithm", J. of Vibration and Control, (accepted for publication).
3. Y. Ma, F. I Chou, P. Y. Yang, J. T. Tsai, Z. Y. Yang, and J. H. Chou, 2020, "Optimal parameter design by NSGA-II and Taguchi method for RCD snubber circuit", IEEE Access, Vol.8, pp.182146-182158.
4. F. I Chou, W. H. Ho and C. H. Chen, 2020, "Niche genetic algorithm for solving multiplicity problems in genetic association studies", Intelligent Automation and Soft Computing, Vol.26, pp.501-512.
5. F. I Chou, W. H. Ho, Y. J. Chen, J. T. Tsai, and C. W. Chang, 2020, "Detecting mixed intrusion in high adaptability using artificial immune system and parallelized automata", Applied Sciences-Basel, Vol.10, Article Number 1566, 16 pages.
6. W. T. Huang, F. I Chou, J. T. Tsai and J. H. Chou, 2020, "Application of graphene nanofluid/ultrasonic atomization MQL System in micromilling and development of optimal predictive model for SKH-9 high-speed steel using fuzzy-logic-based multi-objective design", Int. J. of Fuzzy Systems, Vol.22, pp.2101-2118.
7. K. M. Tu, K. A Yih, F. I Chou, and J. H. Chou, 2020, "Taguchi method and numerical simulation for variable viscosity and non-linear Boussinesq effects on natural convection over a vertical truncated cone in porous media", Energies, Vol.13, Article Number 504, 19 pages.
8. C. H. Chen, F. I Chou, and J. H. Chou, 2020, "Multiobjective evolutionary scheduling and rescheduling of integrated aircraft routing and crew pairing problems", IEEE Access, Vol.8, pp.35018-35030.
9. K. M. Tu, K. A Yih, F. I Chou, and J. H. Chou, 2020, "Numerical solution and Taguchi experimental method for variable viscosity and non-Newtonian fluids effects on heat and mass transfer by natural convection in porous media", Int. J. of Computational Science and Engineering, Vol.22, pp.252-261.
10. W. T. Huang, F. I Chou, J. T. Tsai, T. W. Lin, and J. H. Chou, 2020, "Optimal design of parameters for the nanofluid/ultrasonic atomization minimal quantity lubrication in a micro-milling process", IEEE Trans. on Industrial Informatics, Vol.16, pp.5202-5212.
11. F. I Chou, and M. Y. Cheng, 2019, "Optimal observer design of state delay systems", Mathematical Problems in Engineering, Vol.2019, Article Number 8493298, 8 pages.
12. F. I Chou, Y. K. Tsai, Y. M. Chen, J. T. Tsai and C. C. Kuo, 2019, "Optimizing parameters of multi-layer convolutional neural network by using modeling and optimization method", IEEE Access, Vol.7, pp.68316-68330.
13. F. I Chou, and M. Y. Cheng, 2019, "Optimal design of reduced-order observers with specified eigenvalues and performance measurement of minimizing estimation errors using evolutionary optimization", J. of Low Frequency Noise, Vibration & Active Control, Vol.38, pp.728-739.
14. F. I Chou, and M. Y. Cheng, 2019, "Design of optimal linear reduced-order observers for suppressing transient estimation error", IETE J. of Research, https://doi.org/10.1080/03772063.2019.1579677.
15. P. Y. Yang, F. I Chou, J. T. Tsai, and J. H. Chou, 2019, "Adaptive-uniform-experimental-design-based fractional-order particle swarm optimizer with non-linear time-varying evolution", Applied Sciences-Basel, Vol.9, Article Number 5537, 18 pages.
16. C. C. Chiu, F. I Chou, M. Y. Cheng, and J. T. Tsai, 2016, "Optimization of process parameters for gilding stamping by Taguchi and image processing methods", J. of the Chinese Society of Mechanical Engineers, Vol.37, pp.21-29.
17. F. I Chou, Y. L. Chiang, I T. Chen, and J. T. Tsai, 2015, "Genetic algorithm for optimal resolution planning in DOE-based Taguchi method", J. of the Chinese Society of Mechanical Engineers, Vol.36, pp.481-490.
18. S. H. Chen, F. I Chou, and J. H. Chou, 2013, "Robust controllability of linear interval systems with multiple control delays", Int. J. of Systems Science, Vol.44, pp.2321-2327.
19. S. H. Chen, F. I Chou, and J. H. Chou, 2012, "On robust controllability of linear systems with multiple delays in control", IET Control Theory and Applications, Vol.6, pp.1552-1556.
20. C. C. Chen, F. I Chou, and W. H. Ho, 2010, "PC-based fuzzy control system using the LabVIEW implementation", Mechatronics Magazine, Vol.147, pp.97-103.
＜會議發表＞
1. Y. Ma, P. Y. Yang, F. I Chou, J. T. Tsai, Z. Y. Yang, and J. H. Chou, 2020, "Performance comparison of multi-objective algorithms and application in electrical device", Proc. of the 2020 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SE207.
2. K. M. Tu, J. T. Tsai, K. A. Yih, F. I Chou, and J. H. Chou, 2020, "Application of fuzzy logic and Taguchi experimental method for numerical simulation of natural convection in porous media", Proc. of the 2020 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SE211.
3. F. I Chou, J. H. Chou, and W. H. Ho, 2020, "Stable and quadratic-optimal controllers design for a class of time-varying TS-fuzzy-model-based systems by using a complementarily computational approach", Proc. of the 2020 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SE214.
4. W. H. Ho, T. H. Huang, J. H. Chou, H. S. Huang, F. I Chou, and J. T. Tsai, 2020, "Intelligent classification model for retinal disease using residual neural networks", Proc. of the 2020 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SF206.
5. W. H. Ho, T. H. Huang, J. H. Chou, J. Y. Qu, F. I Chou, and J. T. Tsai, 2020, "Sound detection of heart disease using uniform-design-based convolutional neural networks", Proc. of the 2020 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SF207.
6. F. I Chou, 2020, "Optimal design of reduced-order observer by minimizing a performance index of the state estimation deviation", Proc. of the 2020 National Symposium on System Science and Engineering, Taiwan, Paper Number 1006.
7. K. Y. Yang, P. Y. Yang, F. I Chou and J. H. Chou, 2020, "Parameters optimization for group search algorithm", Proc. of the 2020 International Conference on System Science and Engineering, Taiwan, Paper Number 1032.
8. Y. C. Liao, P. Y. Yang, F. I Chou and J. H. Chou, 2020, "Improved fractional-order particle swarm optimizer based on sliding-level strategy", Proc. of the 2020 International Conference on System Science and Engineering, Taiwan, Paper Number 1035.
9. C. W. Chung, P. Y. Yang, F. I Chou and J. H. Chou, 2020, "Parameter optimization for reinforcement learning by using uniform design", Proc. of the 2020 International Conference on System Science and Engineering, Taiwan, Paper Number 1046.
10. F. I Chou, Y. C. Cheng, P. Y. Yang, J. T. Tsai and J. H. Chou, 2019, "Optimal multiobjective PID design by PSO", Proc. of the 2019 IEEE International Conference on Systems, Man and Cybernetics, Bari, Italy, Paper Number 204.
11. P. Y. Yang, F. I Chou, J. T. Tsai and J. H. Chou, 2019, "Adaptive-uniform-experimental-design-based fractional-order particle swarm optimizer with non-linear time-varying evolution", Proc. of the 2019 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SE9001.
12. F. I Chou, J. T. Tsai, W. H. Ho, Y. M. Chen and C. C. Kuo, 2019, "A triagnulation adversarial framework for agriculture forecasting", Proc. of the 2019 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SE9005.
13. F. I Chou, W. H. Ho, J. T. Tsai, C. W. Chang and Y. J. Chen, 2019, "Applying artificial immune system to perform the screening task in an intrusion detection system", Proc. of the 2019 International Multi-Conference on Engineering and Technology Innovation, Taiwan, Paper Number SE9012.
14. W. T. Huang, F. I Chou, J. T. Tsai and J. H. Chou, 2019, "Study on the quality characteristics of micro milling force using nanofluid (graphene)/ultrasonic atomization MQL system", Proc. of the 27th National Conference on Fuzzy Theory and Its Applications, Taiwan, Paper Number 1018.
15. X. Ji, S. H. Chen and F. I Chou, 2019, "Application of fuzzy regression analysis to prediction of thermal displacement of machine tool spindle", Proc. of the 2019 Conference on Applications of Innovation and Invention, Taiwan, Paper Number TMI003.
16. F. I Chou, Y. H. Yu, T. Y. Lai, and T. Y. Sun, 2011, "Adaptive noise repression based on orthogonal empirical mode decomposition and correlation detection", Proc. of the SICE 2011 Annual Conference, Tokyo, Japan, pp.221-224.
＜專利＞
1. 尹菀珊、楊駿明、周阜毅，“鞋面加工控制裝置及其路徑規劃方法”，2019年8月中華民國發明專利：I667970。
2. 林崇田、張成仲、周阜毅，“自動對位設備之系統轉換參數優化方法”，2019年4月中華民國發明專利：I657324。
3. 張浩禎、林世偉、周阜毅，“輔助操控模擬系統、輔助作動裝置與器械扶持裝置”，2016年6月中華民國發明專利：I537896。
4. 周阜毅、黃加助、林輝鴻、吳昆榮、吳秀美，“能調控流量的供氧裝置”，2014年7月中華人民共和國實用新型專利：CN203710500U。
5. 周阜毅、黃加助、林輝鴻、吳昆榮、吳秀美，“能調控流量的供氧裝置”，2014年5月中華民國新型專利：M477872。